How to test for Legionella in water: A step-by-step UK guide

18 November 2026

Estimated reading time: 0 minutes

Testing for Legionella is simpler than most landlords and building managers expect, as long as the right water is sampled and the right lab analyses it. This guide takes you from the first sample bottle to the final report, so you know what to ask for and what evidence you’ll get.

How do you test water for Legionella?

To test water for Legionella, a trained sampler collects water from key outlets in your system and sends it to a UKAS-accredited laboratory – one independently checked against national standards. The lab grows any Legionella bacteria on a culture plate and counts them.

In short:

  • Where samples come from: The nearest and furthest taps on each pipe run, plus hot water heaters, cold water tanks and little-used outlets.
  • How they’re analysed: Usually by culture, with qPCR – a faster DNA-based test – available for screening.
  • How long it takes: Around 10 days for culture, or one to two days for qPCR.
  • When to test: For hot and cold water systems, your risk assessment decides when and where to sample. There’s no fixed national schedule.

Book your free Legionella testing consultation and we’ll tell you whether your site needs sampling at all.

How Legionella water sampling works, step by step

Professional Legionella water sampling works in seven steps, following British Standard BS 7592 and HSE guidance. Skip one and your results may not stand up at audit.

Before sampling

Your Legionella risk assessment should confirm whether sampling is needed, because testing without a clear reason wastes money. If it is needed, you agree a sampling plan listing every outlet and sample type, so you know what you’re paying for upfront.

On the day

Your sampler records hot and cold temperatures at each outlet first. A temperature failure often explains a positive result before the lab report arrives, so you can start fixing it sooner. Each outlet then gets its own sterile bottle, which means every result traces back to one tap. The bottles are labelled, kept cool and delivered to the lab quickly – ideally the same day.

After sampling

The lab tests each sample for Legionella bacteria. You then get a report measuring each result against HSE action levels, with any remedial work needed.

Where should Legionella samples be taken from?

Legionella samples should be taken from the parts of your system most likely to harbour bacteria and from points that show how the whole system is performing. HSG274 Part 2, the HSE’s guidance on hot and cold water systems, lists the main locations:

  • Sentinel outlets: The nearest and furthest outlet on each branch or loop of pipework.
  • Hot water heaters (calorifiers): The hot water outlet and the drain point at the base, where sludge can build up.
  • Cold water storage tanks: Particularly where incoming mains water is above 20°C.
  • Little-used outlets and dead legs: Such as spare-room showers, or lengths of pipe leading to fittings that have been removed, where water sits still.
  • Outlets failing temperature checks: Where hot water is below 50°C (55°C in healthcare) or cold water is above 20°C.

The guidance also advises sampling from separate hot and cold taps. Mixer taps and outlets fitted after thermostatic mixing valves (TMVs) mainly reflect the condition of the fitting itself, which tells you little about the wider system.

Culture vs qPCR tests: how labs analyse Legionella samples

UK laboratories analyse Legionella samples in one of two ways: culture, the standard method for compliance, or qPCR, a faster DNA-based test that gives an indicative answer.

Feature Culture (ISO 11731) qPCR (ISO/TS 12869)
What it detects Live bacteria that grow on a plate Legionella DNA, from live or dead cells
Results reported as Colony-forming units per litre (cfu/l) Genome units per litre (GU/l)
Typical turnaround Around 10 days 1–2 days
Matches HSE action levels? Yes No – HSE levels are set in cfu/l
Best for Routine monitoring and compliance evidence Urgent checks, outbreak response and screening

A negative qPCR result gives you quick reassurance. A positive one usually needs a culture test to confirm whether live bacteria are present.

How long do Legionella test results take?

Legionella culture results take around 10 days, because the bacteria grow slowly on the lab plate. Many labs flag a likely positive before the final report is issued, so you aren’t left waiting if action is needed.

qPCR results can be ready within one to two days. That speed matters after a suspected case of Legionnaires’ disease, a system failure or before reopening a building that has stood empty.

Book your free Legionella testing consultation or call 0161 483 7112.

When does UK law require Legionella testing?

UK law requires you to assess and control Legionella risk, but it doesn’t require routine testing of every water system.

Duty holders – anyone responsible for a building’s water system, such as employers, landlords and facilities managers – should follow ACOP L8, the HSE’s Approved Code of Practice.

Its supporting guidance, HSG274 Part 2, recommends sampling hot and cold water systems when:

  • Temperature or disinfectant controls aren’t consistently met: Sampling is usually weekly until control is restored.
  • Biocides are used and water runs at lower temperatures: Sampling starts monthly.
  • Occupants are more vulnerable: For example in care homes and healthcare settings.
  • Cases of Legionnaires’ disease: Where a system is linked to a case or outbreak.

Read more: How often should you test for Legionella?

For landlords, the HSE confirms there’s no legal requirement for a ‘Legionella test certificate’. What the law asks for is a suitable risk assessment and sensible controls. That’s why we start with Legionella risk assessments for landlords and only recommend testing where it’s needed.

What happens after you get your results?

After your results arrive, you compare each one against the HSE action levels for hot and cold water systems, set out in HSG274 Part 2:

  • Below 100 cfu/l (colony-forming units per litre): Your system is under control.
  • 100–1,000 cfu/l: Resample and review your control measures.
  • Above 1,000 cfu/l: Review your risk assessment, carry out remedial work such as disinfection, then resample to confirm it has worked.

Legionella testing FAQs

These are the questions we’re asked most often about Legionella testing, from how sampling works to what landlords legally need.

How do you test water for Legionella?

A trained sampler collects water from key outlets, such as taps, showers and tanks, and sends it to a UKAS-accredited laboratory, which cultures the samples and counts any Legionella bacteria present. Sampling usually follows BS 7592, and results typically take around 10 days because Legionella grows slowly. Diagnosing Legionnaires’ disease in people is a separate medical test.

Can you see or smell Legionella in water?

You can’t see, smell or taste Legionella in water – the bacteria are microscopic and leave no visible trace, so contaminated water can look perfectly clean. Warning signs of conditions that favour growth include water stored between 20°C and 45°C, rarely used outlets and sludge in tanks. Only a laboratory test can confirm whether Legionella is present.

Do landlords have to test for Legionella?

Landlords aren’t legally required to test for Legionella routinely, but they must assess and control the risk in their rental properties. The HSE confirms the law doesn’t require a Legionella test certificate. Testing is usually only needed if the risk assessment identifies a specific concern, such as a property left empty for a long period.

Book Legionella testing with Acorn

Acorn handles your Legionella water testing from start to finish – we plan the sampling, collect the samples and send you an audit-ready report. As a member of the Legionella Control Association, our water hygiene team brings over 25 years of experience to every site.

Every sample goes to a UKAS-accredited lab, and your audit-ready reports are stored in ServiceTracker, our online portal, so you can access them 24/7. We’ll also give you honest advice – if your site doesn’t need sampling, we’ll tell you.

Our team covers Greater Manchester, Lancashire, the North West and Yorkshire, with testing available UK-wide. Book your free Legionella testing consultation or call 0161 483 7112. We’ll respond within 24 hours.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.